We're giving this page a facelift!
Visit the previous versionto make edits.
Peak Mountain 3

Central Grooves

FA unknown
CREATED 
UPDATED 

Description

Some thoughtful moves. Too bad it's not longer.

Start up the wide crack / narrow shallow gully below big sprawling bush above top of wall . . . just left of small bush at top of wall, and a few feet left from small bush hanging over edge.

Straight up to reach bolt anchor.

. . . (a bit below top, could move left to finish at top anchor for the route "Left Face").

. . . (much harder to finish up Right to the top anchor for the route "Central Crack".

Top-Roping: This route has a two-bolt top anchor (with no connect between the bolts, and no rappel or lower-off fixture as of 2019). Or could use this route's top anchor as a directional to use the top anchor for the route "Central Crack". Or could use the bolt below top of this route as a directional for using the top anchor for the route "Left Face".

Traversing to other top anchors: To the Right of the top anchor is a facultative bolt for aid and/or protection for reaching the top anchor of the route "Central Crack".

warning

: The rock on and near this route has not been climbed much yet, and some of the rock is still breakable and loose -- so the belayer and other people should stand far away from underneath the climber.

Location

Photo to be added.

Protection

3 bolts for intermediate lead protection as of 2019.

Top anchor is two bolts connected by 2-link chain with quick-links, but no rappel or lower-off fixture (as of 2019).

Facultative bolt to right of top anchor has round-bar-stock hanger.

. . (Bolt studs are 80mm x 10mm wedge expansion bolts 316 Stainless steel.

. . . . Lower hanger for top anchor and hanger for facultative bolt are round-bar stock 316 Stainless.

. . . . Upper hanger for top anchor, and all intermediate Lead hangers are traditional flat stock 304 Stainless.

. . . . Chain and quick-links are Plated steel.

. . . . All installed 2019).